Hoop Wire Connector Multi-Packs
The hoop wire connector is designed to easily and securely connect two ends of hoop wire together. The connector is available in Natural and Black. The Natural is dyeable with standard textile dyes.
Slip one end of the hoop wire into a connector and slide it through your casing.
Better than the metal clip that doesn't conform to the shape of the hoop wire and requires hammering and pliers.
• Due to variables in production, there are slight differences in the thickness and width of the hoop wire. The hoop wire might be marginally looser or tighter in the connector at times. If you would like to make the wire tighter, or more permanent in the connector, squirt high temperature hot melt glue inside the connector and on 1/2" of the ends of the hoop wire before inserting. HoopWire.com has tested high temperature hot melt glue and low temperature hot melt glue and the high temperature hot melt glue adheres better than the low temperature hot melt glue.
• The connector can be removed by forcefully pulling the hoop wire out of the connector. If the hoop wire is glued into the connector, it may be necessary to break the connector with your hoop wire cutters.
Hoop Wire Connector Made in the USA by HoopWire.com