Hoop Wire Connector
Hoop Wire Connector made by HoopWire.com in the USA
This connector is newly designed, is dyeable with standard textile dyes and replaces the original plastic connector.
• Due to variables in production, there are slight differences in the thickness and width of the hoop wire. The hoop wire might be marginally looser or tighter in the connector at times. If you would like to make the wire tighter, or more permanent in the connector, squirt high temperature hot melt glue inside the connector and on 1/2" of the ends of the hoop wire before inserting. HoopWire.com has tested high temperature hot melt glue and low temperature hot melt glue and the high temperature hot melt glue adheres better than the low temperature hot melt glue.
• The connector can be removed by forcefully pulling the hoop wire out of the connector. If the hoop wire is glued into the connector, it may be necessary to break the connector with your hoop wire cutters.